How to Whitelist The Protocol
SPAM has become a big problem. It's reached such proportions that most e-mail services and Internet Service Providers (ISPs) have put some sort of blocking or filtering system in place.
You might unexpectedly find you're not getting the issues of The Protocol that you subscribed to...
Add The Protocol to your (or your ISP's) whitelist now to ensure every issue makes it to your inbox.
One thing you can do no matter what e-mail system you're using is add the FROM address of a recent issue to your address book.
For detailed instructions for your e-mail provider or SPAM-filtering software, please scroll down or click a link below:
You can ensure that The Protocol is delivered to your Inbox by adding the sending address to your "People I Know" list.
- Open the latest issue of The Protocol.
- Click the Add Address button (over on the right) to add the "From" address to your "People I Know" list.
Alternatively, you can just send an e-mail to the "From" address, and that will add the address to your "People I Know" list automatically.
- Open the latest issue of The Protocol.
- Copy the address in the "From" line.
- Click the Reply button (it's in the top right corner).
- A new email window opens with an address pre-filled in the "Send To" box.
- Replace the address in the "Send To" box with the one you copied out of the From line.
- Click Send Now (it's in the top right corner).
Even if the e-mail you send doesn't get through (for whatever reason), the act of sending it does the job of putting the address into your "People I Know" list--and that's what counts.
If you're using an earlier version of AOL, you'll need to set your Mail Controls instead. Here's how:
- Go to Keyword Mail Controls .
- Select the screen name that is subscribed to The Protocol.
- Click Customize Mail Controls For This Screen Name
Select Allow email from all AOL members, email addresses and domains .
- Click Next until the Save button shows up at the bottom.
- Click Save.
If you're using an earlier version of AOL, you'll need to set your Mail Controls instead. Here's how:
- Go to Keyword Mail Controls .
- Select the screen name that is subscribed to The Protocol.
- Click Customize Mail Controls For This Screen Name .
In the section for "exclusion and inclusion parameters", include the domain of the "From" address (dpstele.com, dpsezine.com, AND/OR dpsnewsletter.com)
Thank you for whitelisting The Protocol.
To ensure that The Protocol is delivered to your Yahoo Inbox (not the Bulk Mail folder), you can instruct Yahoo to filter it to your Inbox. Here's how:
- Open your Yahoo mailbox.
- Click Mail Options .
- Click Filters .
- Next, click Add Filter .
- In the top row, labeled From header: make sure "contains" is selected in the pull-down menu.
- Click in the text box next to that pull-down menu, then enter the address in the "From" line of the most recent issue of The Protocol.
- At the bottom, where it says Move the message to: select Inbox from the pull-down menu.
- Click the Add Filter button again.
Thank you for whitelisting
The Protocol.
If you're using Hotmail, you can ensure that The Protocol is delivered to your Inbox by adding the "From" address to your Safe List . Here's how:
- Log on and click the Mail tab to get into your mailbox.
- Click Options (it's over at the top right, next to Help ).
- Click Junk e-Mail Protection .
- Select Safe List .
- In the space provided, enter the address in the "From" line of the most recent issue of The Protocol.
- Click Add .
- When you see the address you entered in the Safe List box, click OK .
Alternatively, you can add the "From" address to your Contacts list:
- Open the most recent issue of The Protocol.
- Click the Save Address button. (It's over to the right in the line of options just above the e-mail.)
- Click OK .
Thank you for whitelisting The Protocol.
If you're using Outlook 2003 for your e-mail, you can make sure that The Protocol is delivered to your Inbox by letting Outlook know you consider it safe. There are a few ways you can do this:
- Open the most recent issue of The Protocol, then add the sender or the sender's domain (dpstele.com, dpsezine.com, AND/OR dpsnewsletter.com) to your Safe List.
- Find the address in the "From" line of the most recent issue of The Protocol and add it to Personal Contacts in your Outlook Address Book.
- Open the most recent issue of The Protocol, then select Mark as Not Junk.
Thank you for whitelisting The Protocol.
If you're using Earthlink, you can make sure that The Protocol is delivered to your Inbox by adding the sending address to your Address Book. Here's how:
- Open the most issue of The Protocol.
- Copy the address in the "From" line.
- Click on Address Book (it's over on the left, below your Folders).
- When your Address Book opens, click the Add button.
- On the Add Contact screen, find the Internet Information box.
- Enter the address you copied from the "From" line into the top Email box.
- Click Save.
Thank you for whitelisting The Protocol.
If you're using MSN version 9 for your e-mail, you can make sure that The Protocol is delivered to your Inbox by adding the sending address to your Safe List. Here's how:
- Open the most issue of The Protocol.
- Copy the address in the "From" line.
- Click on Settings: E-mail | Junk e-mail (it's at the bottom left of the screen, just above Calendar).
- On the E-mail settings screen, click Junk E-Mail Guard.
- Select Safe List.
- In the space provided under "Add people to the safe list", enter the address you copied from the "From" line.
- Click Add.
For older versions of MSN, add our sending address to your Safe List as follows:
- Open the most recent issue of The Protocol.
- Copy the address in the "From" line.
- Click on E-mail settings (it's at the bottom left of the screen, just above Calendar).
- On the E-mail settings screen, click Junk Mail.
- Select Safe List.
- Click Add an item to this list.
- When the Add To Safe List box appears, enter the address you copied from the "From" line into the space provided.
- Click Add.
Thank you for whitelisting The Protocol.
If you're using Verizon for e-mail, you can ensure that The Protocol is delivered to your Inbox by adding the "From" address to your Safe List. Here's how:
- Go to your Verizon Inbox.
- Click Options.
- Select the Block Senders tab (near the top of the screen).
- On the Block Senders screen, you'll see both a "Block Sender List" and a "Safe List". In the space where it says, "Enter e-mail address or sub domain to always accept even if the domain is blocked", enter the address in the "From" line of the most recent issue of The Protocol.
Thank you for whitelisting The Protocol.
If you're using Google's gmail for e-mail, you can ensure that The Protocol is delivered to your Inbox by either adding the sending address to your Contacts list or by marking any incorrectly filed e-mail as "Not Spam". Here's how:
- Open the latest issue of The Protocol.
- Click the More Options link. It's on the title line of the e-mail, over on the right, next to the date. (If you see "Hide Options" instead, then you already have the extra options visible and can just skip this step.)
- When the extra options are visible (just below the subject line), click the Add sender to contacts list link.
Alternatively, you can just send an e-mail to the "From" address, and that will add the address to your Contacts list automatically.
- Open the latest issue of The Protocol.
- Click the Reply link (it's at the bottom of the e-mail, on the left).
- A new email window opens with an address pre-filled in the "Send To" box.
- Click Send Now (it's in the top right corner).
Even if the e-mail you send doesn't get through (for whatever reason), the act of sending it does the job of putting the address into your Contacts list--and that's what counts.
If an issue of The Protocol has been filtered into the Spam folder, you can prevent that ever happening again:
- Click on the Spam link to open your Spam folder.
- Click on the wrongly filtered issue to open it.
- Click the Not Spam button at the top of the e-mail (right next to "Delete Forever").
Thank you for whitelisting The Protocol.
If you're using SpamCop to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your Whitelist. Here's how:
- Open your browser and go to this page: https://www.spamcop.net/
- Log into your SpamCop account.
- Click on the Options icon in the toolbar.
- Under Mail Management (in the middle), click SpamCop Tools.
- Select Manage your personal whitelist.
- Near the bottom, where it reads "Click here to add to your whitelist", click on Click here.
- Enter the address in the "From" line of the most issue of The Protocol in the first empty slot.
- Click Submit.
Thank you for whitelisting
The Protocol.
If you're using Spam Assassin to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to the Whitelist in your User Preferences. Here's how:
- Search your hard drive for the spamassassin folder, then open it.
- In that folder should be a file named user_prefs. Open it with a text editor (Notepad, for example). If there is no such file, you can create it. The detailed instructions are at http://spamassassin.taint.org/doc/Mail_SpamAssassin_Conf.html.
- Make a new (blank) line in the file. On that line, enter whitelist_from, followed by the address in the "From" line of the most issue of The Protocol.
- Save the file and close i
Thank you for whitelisting The Protocol.
If you're using McAfee's Spamkiller to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Friends. Here's how:
- On the Spamkiller sidebar, click Friends.
- Click Add.
- Enter the address in the "From" line of the most recent issue of The Protocol.
- Click the OK button.
Thank you for whitelisting The Protocol.
If you're using Mailblocks to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your "Accept Mail From" list of addresses. Here's how:
- In Mailblocks, click the Addresses tab.
- Select New.
- Enter the address in the "From" line of the most recent issue of The Protocol.
- In the Receiving Options, select Accept Mail From This Address.
- In the Other Options, make sure Display in People Picker is not selected.
- Click Submit.
- Click OK.
Thank you for whitelisting
The Protocol.
If you're using MailShield to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Friends. Here's how:
- On the MailShield toolbar, click Friends.
- Click Add.
- Enter the address in the "From" line of the most recent issue of The Protocol.
- Click the OK button.
Thank you for whitelisting The Protocol.
If you're using MailWasher to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Friends. Here's how:
- In MailWasher, select Tools.
- Select Blacklist & Friends.
- On the right-hand side is the "Friends" list. Click the Friends Add button.
- Select Plain email address.
- Enter the address in the "From" line of the most recent issue of The Protocol, then click OK.
- Click OK again.
Thank you for whitelisting
The Protocol.
If you're using CleanMyMailbox to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding our "From" address to your Whitelist. Here's how:
- Click the Whitelist button.
- Add to the list the address in the "From" line of the most recent issue of The Protocol.
- Click the Submit List button.
Thank you for whitelisting The Protocol.
If you're using Oddpost to filter your incoming e-mail, you can exempt The Protocol from the filtering process by marking it as "Not Spam"--but only if it has been incorrectly identified as spam in the first place. Here's what to do:
- Find any e-mail from the sender you want to whitelist that's in your Probably Spam folder.
- Click on that e-mail to select it.
- Click the Move to Inbox and Mark as Not Spam button.
Thank you for whitelisting The Protocol.
| Norton Internet Security 2006 |
To ensure that The Protocol is not filtered by Norton Internet Security 2006, you can add "dpstele.com" to your Allowed List. Here's how:
- Open Norton Internet Security 2006.
- Click "Norton AntiSpam" on the left side of the window.
- Click "Allowed List", then "Configure".
- In the Allowed List window, click "Add".
- In the Address Type dropdown menu, select "Domain".
- In the Address text box, type "@dpstele.com"
- Click 'OK' on both windows to complete the process.
Thank you for whitelisting
The Protocol.
If you're using Spam Inspector to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Friends. Here's how:
- Open Outlook.
- On the Spam Inspector menu or toolbar, find and select Manage Friends List .
- In the Add a New Friend area, select E-mail .
- Enter the address in the "From" line of the most recent issue of The Protocol.
- Click the >> (add) button.
- Click Close .
Thank you for whitelisting The Protocol.
If you're using Spam Interceptor to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Trusted senders. Here's how:
- Open Spam Interceptor and select Authentication Lists .
- Click Trusted .
- Enter the address in the "From" line of the most recent issue of The Protocol.
- Click Add .
Thank you for whitelisting The Protocol.
If you're using Spam Sleuth to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Friends. Here's how:
- Open Spam Sleuth.
- From the File menu, select Configure .
- In the Friends category, make sure Active is selected.
- In the space provided for the list, make a new (blank) line and on it enter the address in the "From" line of the most recent issue of The Protocol.
- Click OK .
Thank you for whitelisting The Protocol.
If you're using Spam Butcher to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your Know Senders list. Here's how:
- Open Spam Butcher and click the Configure button.
- Select the Known Senders tab.
- Under Known Good Senders and Recipients , click Add .
- Enter the address in the "From" line of the most recent issue of The Protocol, and click OK .
- Click OK .
Thank you for whitelisting The Protocol.
If you're using Spameater to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your list of Approved Senders. Here's how:
- On the Spameater sidebar, click Filters .
- Select the Approved Senders tab.
- Click Add Filter .
- In the Address space, enter the address in the "From" line of the most recent issue of The Protocol.
- For Address Type , select Full Email Address .
- Click OK .
Thank you for whitelisting
The Protocol.
If you're using Cloudmark's SpamNet to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your Whitelist. Here's how:
- Open your Outlook Inbox.
- On the Cloudmark SpamNet toolbar, click Options .
- Click Advanced .
- Select the Whitelist tab.
- Click the Add button.
- Enter the address in the "From" line of the most recent issue of The Protocol, and click the OK button.
- Click OK again, then Yes , then OK one last time.
Thank you for whitelisting The Protocol.
If you're using SpamPal to filter your incoming e-mail, you can exempt The Protocol from the filtering process by adding the "From" address to your Whitelist. Here's how:
- When SpamPal is running, find the SpamPal icon in your Windows system tray and right-click on it.
- Select Add to Whitelist .
- Enter the address in the "From" line of the most recent issue of The Protocol.
- Click Add .
Thank you for whitelisting The Protocol.
Many popular e-mail programs, including older versions of Outlook, Outlook Express , Eudora , and Netscape Mail , don't provide a convenient way for you to whitelist the folks you want to receive e-mail from. If you're using this sort of e-mail system and you either aren't getting e-mail you value or want to make sure you continue to receive it in the future, you can do something about it.
Contact the customer service people or the postmaster at the company that provides your e-mail or Internet connection (your ISP). Explain to them that The Protocol is e-mail that you asked for and value. Ask them if they can whitelist the sender. If they can, they'll probably ask you for some information about The Protocol. Here's what to tell them:
- Sending Address: The address in the "From" line of the most recent issue of The Protocol.
- Domain: dpstele.com, dpsezine.com, AND dpsnewsletter.com
- IP Address: 72.3.142.47
Thank you for whitelisting
The Protocol.
Email alarm notification and comprehensive debug tools are just part of the NEBS-certified NetGuardian 832A.. Mediate contact closures to SNMP Traps ... access remote site equipment through terminal server ports ... learn everything the NetGuardian 832A can do for you.
See Full Specifications of the NetGuardian 832A
The Protocol Navigation
ADPCM Card FDO 3000 GTE Mediates with IAM 1999 Presedent Letter San Juan County Adds Legacy Support T/Mon Story: Sprint PCS Qwest Escapes Vendor Lockout Praise from our Partners Featured Employee: Darin Simmons MCI Worldcom, customer premise monitoring Space is a Premium in Co-Location Facilities ADS Performs Multi-Vendor Alarm Monitoring CapRock Communications' Alarm Distribution President's Letter: DPS Specializes In Mediation Solutions President's Letter: We continue to focus on providing our customers innovative network management solutions Dynamic Vs. Static IP Addressing President's Letter: SUPERCOMM In Atlanta President's Letter: Look for stability in Telecom's uncertain economy President's Letter: Increased consumer expectations lead to a new pitch for network reliability You Can Succeed When Others Are Failing, If You Focus On Customer Service President's Letter: Why Smart Technology Makes Great Business President's Letter: How To Make Your Network Monitoring Better Than Your Competitors' 2018 Issues MCS11 Protocol Tutorial Protocol Surveys NetMediator And KDAs: Troubleshoot TBOS Ports With This Test Set New LCD menu installation without a PC Tech Support T/Mon Web Documentation T/Mon Wizards - coming soon to a T/Mon near you Remote Factory Training 30 Years of Business Winter Storm: Please Send Me Your Advice 
